DMX wall type controller (WC-5LP)

 INTRODUCTION:
 
This unit is DMX recorder and player controller.                                                                                                                                                                                                                                                                                         There are 5 scenes which you can record from a DMX controller, then control any DMX device.                                                                                                                                                                                                                                                                                           Each scene has standard 512 channels.                                                                                                                                                                                                                                          There is an additional relay control which is operated by AUX switch.                                                                                                                                                                                                                                                                                          WC-5LP is normally in 120 type size, or MS special size.
 
Recording scene:
1.     Plug in power DC-12V then confirm the unit is in OFF.
2.     Connect the DMX controller to the unit via male XLR socket.
3.     Push the “learning” button on back side.
4.     Running the scene on DMX controller which is you want to record.
5.     Select scene no. 1-5 on this unit. Then push this no. then you will see LED flash 3 times which means the scene is recorded.
Repeating step 4 to step 5, you will get maximum of 5 scenes.
6.   When all scenes are recorder, please push the “learning” switch once more in order to go into “play” mode.  
 
Scene operating:
1.     Push ON button then you can select button 1-5 which is the recorded scene which you want to be running.
2.     In running you can use UP and DOWN button to control output.
AUX control:  push AUX button you can control relay contact.
OFF control:  push OFF you can turn off control.

RS-232 function:

Baud rate: 38400                                                                           

Power off: WC-5LP POWER 0                                                                               

Power on: WC-5LP POWER 1                                                                                

 ........                                                                                                                         

Set channel data:  WC-5LP CH: 001-512/000-255                                                 

AUX Control: WC-5LP AUX 1 / WC-5LP AUX 0

Output control:
              WC-5LP BRIGHTNESS U
              WC-5LP BRIGHTNESS D
              WC-5LP BRIGHTNESS 255
              WC-5LP BRIGHTNESS 128
              WC-5LP BRIGHTNESS 000 

 

 

香港公司地址:Unit 1105,11/F.,Tower 1, Lippo Centre, No.89 Queensway, Admiralty, Hongkong. 

工厂地址:广州市白云区均禾街罗岗村七社工业区 


邮编.: 510400 

电话:  020 86260903 

传真:  020 86264401 

info@cngdjs.com

本网站由阿里云提供云计算及安全服务 Powered by CloudDream